Why Fosroc Nitoseal PU40?

Nitoseal PU40 is suitable for sealing joints in concrete, brickwork, blockwork, precast panels, stone cladding, perimeter sealing around doors and windows, and non trafficked floor joints.

Advantages:

• Adhesion to most common building materials.
• Single component with fast rate of cure.
• Easy to apply.
• UV resistant.
• Primerless for most applications (see “Priming”).
• Available in a range of colours.
• ISO11600:2002 Type F 25LM compliant

Health and Safety instruction:

• Nitoseal PU40 may be harmful if swallowed or inhaled and may cause skin and eye irritation. Product contains a very small amount of isocyanates and low flash point solvent.
• Should accidental skin contact occur, remove contaminated clothing and wash with warm soapy water. Do not scrub. If inhaled remove person to fresh air. Get medical advice if breathing becomes difficult. In case of contact with eyes, rinse immediately wih plenty of clean water for at least 15 minutes and seek medical advice. If swallowed, give a glass of water to dilute and seek medical attention immediately – do not induce vomitting. 

Fire:

Nitoseal PU40 does not readily support flame. Primer4, Primer 7E and Nitoflor Sol is highly flammable liquid. Keep away from sources of ignition. No smoking. Containers should be tightly sealed when not in use. In the event of fire, extinguish with CO2 or foam. Do not use water jet.

Cleaning:

Clean tools immediately after use with Fosroc Equipment Cleaner or Fosroc Solvent 102.