Fosroc Chemical Products

ProductsDescriptionCoverageAdvantages
Brushbond RFX
(Two Component W/p)		High Performance elastomeric two component cementitious flexible coating used for concrete slabs,
all wet areas, Water Tank, reservoirs, brick and block work substrates, swimming pools,
water retaining structures		Add powder to Liquid apply two coats opp-directions of one to other
Coverage (15kg + 4.8 lit pack) 12 - 14sqm per 20kg pack 		Flexible, with thermal expansion similar to concrete.
Excellent bond to concrete and masonry.
Good crack accommodation capacity.
NITOBOND SBR/SBR LatexMortar and Screed modifier cum bonding aid.
Nitrobond SBR/SBR Latex is used for modifying and
improving the bounding of floor topping, rendering.
Used for mortar and screed repairs of worn, damaged
and spalled concrete, repair screeds.		Recommended SBR 15-20(%) by the weight of cement.Excellent bond to concrete, masonry, stonework, plaster.
Economical high strength adhesion. Improved tensile & flexural
Strength of mortar.
Improves durability.
Reduce permeability.
Cost effective
Lokfix (Anchoring Grout)Lokfix is a two-component polyester resin anchoring grout, anchoring/
fixing of reinforced steel bars, bolts, base plates, gate posts, barriers,
safety fences, railway tracks, dowels, foundations bolts.		Available in two grades:
Lokfix p: Vertical
Lokfix S: Horizontal applications.
Refer datasheet for coverage.		Rapid strength gain.
Vibration resistant.
corrosion resistant.
Non-expansive.
It can be placed in unerwater.
Nitobond EP (epoxy bondig agent)Epoxy based concrete bonding agent. Used
for bonding new concrete surface to old
concrete surface.		Approx 2.2 sqm/ltr per coat. More overlay time:
Enable to place the concrete up to 6hrs.		Can be applied to dry or damp surface
High mechanical strength
Good positive adhesion.
Conbextra Gp2( cementitious grout)Non-shrink, high strength cementitious grout. It a ready to used
dry powder. The addition of a controlled amount of clean water
produces a free flowing grout for bolt pockets, base plates of
machinery, generators, turbines, cement mills, compressor,
boiler feed pumps & fence posts etc.
Flowable consistency: 13.3ltr/25kg
(1 cubic needs 2MT of material)		Ready to use.
Pre-packed, free-flowing, non shrink,
high early ultimates strength, capable of
withstanding static & dynamic loads and corrosion
resistance
Nitoseal PU40
(PU sealant)		One part, low modules gun-grade elastomeric sealant based on polyurethane technology.
Applied to joints between 5 and 35mm wide. All moving joints should be designed to an optimum
width to depth ratio of 2:1
Pack size: 600ml coverage: refer data sheet.
Joint surfaces must be clean, dry and free
from dust.		Adhesion to most common building materials.
Single component with fast rate of cure.
Easy to apply.
UV resistant.
Primerless for most applications
Brush Bond Roofguard (Terrace Coating)High build fiber reinforced acrylic elastomeric
waterproof coating old & new roofs. Can be
applied directly on existing concrete, brickbat
Coba and screed concrete even without removal.
Not required protection, screed. Available: grey,
white & terracotta		1sqm/Ltr/Per coat Recommended: Self Primer.1:1(water)
Three coats without dilution of water. The coating direction
to be opposite one to other.		Single component.
Excellent bonding to substrates.
Forms the thickness of 1mm(DFT) in 3 cots.
No protection screed required.
Durable in all climate conditions including Uv attack.
Decofill (crack filling paste)Acrylic sealant crack filling paste.Packing: 1kgEasy to apply and finish.
Nitotile EPW (Epoxy title grout)Nitotile EPW Grout is a 3 component water miscible epoxy resin title joint filler.Coverage: Number of Ltrs requriedResistant to mild chemicals and acid.
Solvent free, non staining.
Resists bacterial growth & hygienic.