Why Fosroc Nitocote Wall Guard?

Nitocote Wall Guard provides a cementitious, elastomeric coating with inherent crack-bridging ability. Typical applications include:

• Provides a high quality effective waterproofing cum decorative coating for exterior wall.
•  Prevents dampness of external wall subjected to severe weather in coastal environment.
•  Ideally suitable for coating on all type of external masonry surfaces, concrete, cement sand renderings etc.

Advantages:

• High build film – Higher film thickness provides tough waterproof membrane ensuring no ingress of water with standing wind driven rain.
•  Highly flexible – Accommodates movement in the structure covers hairline cracks(upto 0.5 mm).
•  Elongation – Easily accomodates movement of thermal expansion & contraction. 100% elongation at 110-120 micron DFT crack bridging in excess of 0.5 mm.
• Ready to use – Dilution is not required.
• UV stability – Resistance to UV rays.
• Anti dirt – low dirt pick up & can be cleaned easily.
• Breathability – Allow internal moisture to escape.
• Ease of application – User friendly product, easily applicable by brush, roller or spray

Health and Safety instruction:

Nitocote Wall Guard should not come in contact with the skin and eyes, or be swallowed.Adequate ventilation should be ensured and inhalation of vapours should be avoided. Some people are sensitive to polymers, hence suitable protective clothing, gloves and eye protection should be worn. If working in confined areas, suitable respiratory protective equipment must be used. In case of contact with skin, should be rinsed immediately with plenty of clean water and medical advice sought. If swallowed, medical attention sought  immediately.Should not induce vomitting.

Cleaning:

Clean tools and equipment immediately after use with water. Wash hands and skin with soap or an industrial hand cleaner.