FOSROC ADHESIVES
| Product | Description | Typical Uses | Dosage / Coverage / Yeld |
|---|---|---|---|
| Segmental Bonding Adhesive | |||
| Nitobond PC 6 kg | Thixotropic epoxy adhesive for precast segments. | Bonding precasts concrete segments to speed up construction and provide structural and water resistant joint eg. flovers, bridges, pipelines etc. | 1.63m 2 / pack @ 2mm thickness |
| Concrete Bonding Agents | |||
| Nitotile EP 0.5, 1 & 4 litres | Solvent free epoxy bonding agent for joining old and new concrete | For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by formwork. Ideal for extensions and repairs structural concrete in industrial, residential and commercial buildings | 2.6 m 2/litre |
| Nitobond AR 1, 5, 20 litre | Acrylic emulsion cement modifier and concrete bonding agent. | Recommended as a primer for the Fosroc cementitious repairs system for improving bonding in renders and mortars, repair of worn, damaged or spalled concrete. | 6-8 m 2/litre |
| Nitobond SBR 1, 5, 20 litres | Styrene butadine polymer bonding agent cum cement mortar & concrete modifir. | Used to modify the concrete for repairing destressed RC members and to modify mortars as waterproofing. | approximately 4- 5 m2/ litre depending on substrate porosity. |
| Nitobond SBR Latex 1, 5, 20 litre | Latex based mortar and screed modifier & bonding agent | For modifying and improving bonding of flor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks, polymer modifid flor screeds, waterproof plasters for masonary and slurries. | approximately 4- 5 m2/ liter depending on substrate porosity. |
| Tile Adhesive | |||
| Nitotile GPX 5 & 30kg | Single component, tropical grade, ceramic tile adhesive. | High quality adhesive for the permanent fiing up ceramic tiles both in internal and submerged conditions i.e swimming pools, toilets, kitchens, florings etc. | 3.8 kg/m 2 @ 2mm |
| Nitotile GTA thickness Part A 30kg powder Part B 7.5kg polymer | Polymer modifid granite and marble tile adhesive. | Permanent fining of granite and marble tiles. | Approx 0.8% for 5kgs @ 3 mm thickness |
| Nitotile MPA 30 kgs | Multipurpose tile adhesive for the external and tile on tile application | High quality adhesive for the permanent fiing of ceramics tiles over smooth surfaces such as existing tiles, ceramic tiles or glass and external facia applications. | 3.8kg/m 2 @ 2mm thickness |
| Tile Grout | |||
| Nitotile Grout 1 kg | Pigmented, cement based tile joint filer. | High qulaity joint filer for filing the tile joints. | 49 RM in a 3x5mm joint / kg |
| Nitotile EPW Grout 1 kg & 5 kgs | Hygienic, hard wearing stain free water miscible epoxy resin tile grout. | Provides a stain free, chemical resistant, hard wearing, tile joint for areas like bathrooms, fountains and swimming pools. Factories, workshops and ware houses pharma industry, hospitals and labs commercial & residential buildings. | Refer datasheet |