Fosroc Chemical Products
Products | Description | Coverage | Advantages |
---|---|---|---|
Brushbond RFX (Two Component W/p) | High Performance elastomeric two component cementitious flexible coating used for concrete slabs, all wet areas, Water Tank, reservoirs, brick and block work substrates, swimming pools, water retaining structures | Add powder to Liquid apply two coats opp-directions of one to other Coverage (15kg + 4.8 lit pack) 12 - 14sqm per 20kg pack | Flexible, with thermal expansion similar to concrete. Excellent bond to concrete and masonry. Good crack accommodation capacity. |
NITOBOND SBR/SBR Latex | Mortar and Screed modifier cum bonding aid. Nitrobond SBR/SBR Latex is used for modifying and improving the bounding of floor topping, rendering. Used for mortar and screed repairs of worn, damaged and spalled concrete, repair screeds. | Recommended SBR 15-20(%) by the weight of cement. | Excellent bond to concrete, masonry, stonework, plaster. Economical high strength adhesion. Improved tensile & flexural Strength of mortar. Improves durability. Reduce permeability. Cost effective |
Lokfix (Anchoring Grout) | Lokfix is a two-component polyester resin anchoring grout, anchoring/ fixing of reinforced steel bars, bolts, base plates, gate posts, barriers, safety fences, railway tracks, dowels, foundations bolts. | Available in two grades: Lokfix p: Vertical Lokfix S: Horizontal applications. Refer datasheet for coverage. | Rapid strength gain. Vibration resistant. corrosion resistant. Non-expansive. It can be placed in unerwater. |
Nitobond EP (epoxy bondig agent) | Epoxy based concrete bonding agent. Used for bonding new concrete surface to old concrete surface. | Approx 2.2 sqm/ltr per coat. More overlay time: Enable to place the concrete up to 6hrs. | Can be applied to dry or damp surface High mechanical strength Good positive adhesion. |
Conbextra Gp2( cementitious grout) | Non-shrink, high strength cementitious grout. It a ready to used dry powder. The addition of a controlled amount of clean water produces a free flowing grout for bolt pockets, base plates of machinery, generators, turbines, cement mills, compressor, boiler feed pumps & fence posts etc. | Flowable consistency: 13.3ltr/25kg (1 cubic needs 2MT of material) | Ready to use. Pre-packed, free-flowing, non shrink, high early ultimates strength, capable of withstanding static & dynamic loads and corrosion resistance |
Nitoseal PU40 (PU sealant) | One part, low modules gun-grade elastomeric sealant based on polyurethane technology. Applied to joints between 5 and 35mm wide. All moving joints should be designed to an optimum width to depth ratio of 2:1 | Pack size: 600ml coverage: refer data sheet. Joint surfaces must be clean, dry and free from dust. | Adhesion to most common building materials. Single component with fast rate of cure. Easy to apply. UV resistant. Primerless for most applications |
Brush Bond Roofguard (Terrace Coating) | High build fiber reinforced acrylic elastomeric waterproof coating old & new roofs. Can be applied directly on existing concrete, brickbat Coba and screed concrete even without removal. Not required protection, screed. Available: grey, white & terracotta | 1sqm/Ltr/Per coat Recommended: Self Primer.1:1(water) Three coats without dilution of water. The coating direction to be opposite one to other. | Single component. Excellent bonding to substrates. Forms the thickness of 1mm(DFT) in 3 cots. No protection screed required. Durable in all climate conditions including Uv attack. |
Decofill (crack filling paste) | Acrylic sealant crack filling paste. | Packing: 1kg | Easy to apply and finish. |
Nitotile EPW (Epoxy title grout) | Nitotile EPW Grout is a 3 component water miscible epoxy resin title joint filler. | Coverage: Number of Ltrs requried | Resistant to mild chemicals and acid. Solvent free, non staining. Resists bacterial growth & hygienic. |