FOSROC JOINT SEALANTS
Product | Description | Typical Uses | Dosage / Coverage / Yield |
---|---|---|---|
Civil Engineering Sealants | |||
Thioflex 600 GG Thioflex 600 PG 2.5 litres | Two part polysulphide sealant. | It is particularly recommended for sealing structural expansion joints in most civil engineering structures like building superstructures, subways, basements, flors and reserviors. | Refer datasheet. Dependent on joint size |
Nitoseal MS600 Black - 3 liters Grey - 3 litres | One part, civil engineering sealant for immersed conditions. | Nitoseal MS600 is suitable for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermitten or permanent immersion. | Refer datasheet |
Building Sealants | |||
Decofi 310ml cartridges | Fast setting flexible acrylic sealant. | - Wall / ceiling angles, cornices - Door and window frame surrounds - Fitted furniture - Skirtings - Staircases - Replacement window installations | Refer datasheet |
Nitoseal PU40 600ml sachet | One part, PU based building & expansion joint sealant. | Nitoseal PU40 is suitable for sealing joints in concrete, brickwork, blockwork, precast panels, stone cladding, perimeter sealing around doors and windows, and non traffied flor joints. | Refer datasheet |
Nitoseal PU 280 4.0 litres | Heavy duty epoxy urethane joint sealant | For sealing internal flor joints subject to heavy industrial use in factories warehouses etc. Particularly suitable for sawcut joints for long strip floring and other non moving joints. | Refer datasheet |
Pavement Sealants | |||
Colpor 200/200PF Black - 3 litres Grey - 3 litres | Cold applied, high performance, fuel resistant, pitch and pitchfree polyurethane sealant. | For sealing joints in concrete joints in concrete roads, concrete runways. Also suitable for sealing concrete joints where fuel and oil spillage might occur like runways, oil terminals, parkings and cargo areas. | |
Polyethylene Filler Board & Backup Cord | |||
Expancell Available in different sizes | Closed cell polyethylene joint sealant backup cord. | Expancell is a closed cell polyethylene foam supplied in circular cord lengths for use as a back up material for joint sealing applications. Expancell is available in a variety of sizes ranging from 6mm to 50mm in diameter suitable for the most commonly encountered joint dimensions. | Refer datasheet |
Hydrocell XL 900 x 1800 mm sheets | Closed cell, non-absorbent, polyethylene joint filer. | Hydrocell XL semi-rigid, cellular polyethylene joint f ller used for forming expansion joints in concrete, brickwork and blockwork. The product provides excellent support to sealants subject to hydrostatic pressure and is particularly recommended for water retaining or water excluding structures. | Refer datasheet |
Expansion Joint Membrane | |||
Expoband One 25m x 100mm x 1mm Roll 25m x 200mm x 1mm Roll 15m x 100mm x 2mm Roll 15m x 200mm x 2mm Roll | Flexible expansion joint membrane. | Expoband One is a hypalon membrane system which is designed to be bonded over movement joints or cracks in structures to prevent the passage of water. It is bonded in position using Nitomortar FCFS two-part epoxy adhesive. Exponand One is suitable for construction use and in repair/ remedial applications. | Refer datasheet |