Why Fosroc Nitobond EP?

For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fi tted. The product is ideal for roads, bridges, pavements, loading bays and factories, building segment and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.

Nitobond EP may also be used as part of a repair system where a bonding agent is required or where the substrate is likely to remain permanently damp or wet.

Advantages:

Nitobond EP can be applied by brush.

• More overlay time : Enables to place the concrete for longer period of time, without risk of delamination.
• High bond strength : Bond strength is more than the tensile strength of good quality concrete.
• Barrier coat : Acts as a ‘barrier coat’ to the migration of chloride ions from host concrete.
• Can be applied on to dry or damp substrates.

Health and Safety instruction:

Contact with skin and eyes should be avoided. Gloves should be used when handling these products. If contact wiith the resin occurs, wash immediately with a strong detergent or a resin removing cream. Eye contamination must be immediately washed with plenty of water and medical treatment sought.

Fire:

Nitobond EP is infl ammable. No naked fl ame should be allowed near the site. Do not smoke during use.

Cleaning:

Nitobond EP should be removed from tools, equipment and mixers with Nitofl or Sol immediately after use. Hardened material
can only be removed mechanically.